What to do if dental cement accidentally got into the board-to-board connector?

What to do if dental cement accidentally got into the board-to-board connector?

Try submerging the X-Headstage in acetone for a few hours, then use a swab (preferably cotton-less) to remove the residue.


    • Related Articles

    • Designing electrode interface board (EIB) for the X-Headstage

      Designing an electrode interface board (EIB) for the X-Headstages is easy. Download the example EIB Eagle PCB design in the Download/PCB Design/ section. You must register an account here to see the link. Here are a few things to keep in mind: X3R32, ...

    • Can the X-Headstage be configured with an Omnetics connector?

      X-Headstage can be configured with a 12-pin Omnetics connector. However, we strongly recommend that new users consider the µHDMI connector. It is easy to plug in and unplug and uses a low-cost, flexible cable.

    • Is X-Headstage's HDMI connector solution same as ones used by other vendors (such as NeuroNexus' Smartbox)?

      The X-Headstage is designed to leverage consumer tech HDMI accessories, so we carefully mapped the signal circuit to ensure maximum compatibility. NeuroNexus and other vendors custom-made the HDMI cable for their specifications and, therefore, have ...

    • Selecting and Configuring the X-Headstage

      Currently, KONTEX offers several types of X-Headstages X3R32: 32ch recording headstage X3R64: 64ch recording headstage XeR64: e-series 64ch recording headstage XeSR16: e-series 16ch switchable stimulation + recording headstage XeSR32: e-series 32ch ...

    • Notes on X-Headstage IP68 rating

      The X-Headstage has been tested for IP68 rating by a third party (test report here). The rating is achieved with the following: An IP armor is configured with the headstage The optional moisture resistance coating must be specified at the time of the ...