XDAQ DB25 pinout

XDAQ DB25 pinout

DB25 connector pin out for XDAQ ONE and CORE

DB Pin

Signal

1


2

DI 03

3

DI 05

4

DI 07

5


6


7


8


9


10

DO 04

11

DO 06

12

DO 08

13

DAQ ON

14

SYS GND

15

DI 04

16

DI 06

17

DI 08

18


19


20


21


22

DO 03

23

DO 05

24

DO 07

25

Sample CLK


DAQ ON: logic high at onset of a recording session
Sample CLK: is the sampling clock used to drive the X-Headstage

    • Related Articles

    • XDAQ IO Expander DB25 pinout

      DB Pin INPUT/OUTPUT 1 IO 15 2 IO 16 3 IO 17 4 IO 18 5 IO 19 6 IO 20 7 IO 21 8 IO 22 9 IO 23 10 IO 24 11 IO 25 12 IO 26 13 IO 27 14 SYS GND 15 IO 28 16 IO 29 17 IO 30 18 IO 31 19 IO 32 20 NC 21 NC 22 NC 23 NC 24 NC 25 NC

    • How to connect the XDAQ IO Expander to the XDAQ

      To use the XDAQ IO Expander, connect the XDAQ’s EXP1 port to the Expander’s EXP1 port and the XDAQ’s EXP2 port to the Expander’s EXP2 port. The XDAQ’s powering sequence is not critical; it can be powered on before or after plugging in to the ...

    • XDAQ supported headstages

      In addition to the ultra-small X-Headstages, XDAQ supports existing Intan-compatible headstages (from Intan, NeuroNexus, and more). To run these headstages with their corresponding accessories, you will need an adapter to properly remap the control ...

    • Updating the Gen2 XDAQ Firmware

      KonteX periodically releases new firmwares for bug fixes and new functionalities. Additional capabilities may be enabled if they were not selected in the initial purchase(e.g. adding the SR32 capability or Neuropixels support). To update the ...

    • How do I use my old Intan headstages with XDAQ?

      Use XDAQ to Intan RHD Adapterhttps://kontex.io/collections/system-adapter/products/xdaq-to-intan-headstage-adapter Note: For XDAQ CORE only one of the two Omnetics 12pin connector will be active. XDAQ to Intan RHS Adapter ...