How to connect the XDAQ IO Expander to the XDAQ
To use the XDAQ IO Expander, connect the XDAQ’s EXP1 port to the Expander’s EXP1 port and the XDAQ’s EXP2 port to the Expander’s EXP2 port. The XDAQ’s powering sequence is not critical; it can be powered on before or after plugging in to the Expander. Once the connection is made, turn on the software.
Related Articles
XDAQ IO Expander DB25 pinout
DB Pin INPUT/OUTPUT 1 IO 15 2 IO 16 3 IO 17 4 IO 18 5 IO 19 6 IO 20 7 IO 21 8 IO 22 9 IO 23 10 IO 24 11 IO 25 12 IO 26 13 IO 27 14 SYS GND 15 IO 28 16 IO 29 17 IO 30 18 IO 31 19 IO 32 20 NC 21 NC 22 NC 23 NC 24 NC 25 NC
How do I use my old Intan headstages with XDAQ?
Use XDAQ to Intan RHD Adapterhttps://kontex.io/collections/system-adapter/products/xdaq-to-intan-headstage-adapter Note: For XDAQ CORE only one of the two Omnetics 12pin connector will be active. XDAQ to Intan RHS Adapter ...
Updating the Gen2 XDAQ Firmware
KonteX periodically releases new firmwares for bug fixes and new functionalities. Additional capabilities may be enabled if they were not selected in the initial purchase(e.g. adding the SR32 capability or Neuropixels support). To update the ...
How to run more than 4 headstages with the XDAQ?
XDAQ is designed for high-channel neural acquisition. Although each box has only 4 ports on board, it is possible to drive more than 4 headstages/animals at the same time (though each with a lower channel count configuration). For example, each XDAQ ...
What is the purpose of the ground ports in the back of the XDAQ ONE?
These ports are designed to help troubleshoot and establish an optimal grounding scheme for the XDAQ acquisition hardware and thus minimize noises in the neural recordings. Most instrumentation ties all grounds - digital or analog - together, which ...