Do I need to use the KONTEX XDAQ system to use the X-Headstage?

Do I need to use the KONTEX XDAQ system to use the X-Headstage?

No, you could use any existing Intan-compatible controllers (from Intan, Open-Ephys, NeuroNexus Smartbox, etc.). 


The X-Headstage is designed to use the micro HDMI connector, which is easy to plug in and can leverage our low-cost, ultra-flexible cable solution. We provide adapters to interface the micro HDMI connector with Intan's 12-pin or 16-pin connector to their system. Alternatively, you can configure the X-Headstage with the Omnetics connectors and use the existing cable solution. Note that the micro HDMI connector offers the flexibility of supporting both xR (record only) and xSR (switchable stim and record) headstages.


    • Related Articles

    • Selecting and Configuring the X-Headstage

      Currently, KONTEX offers several types of X-Headstages X3R32: 32ch recording headstage X3R64: 64ch recording headstage XeR64: e-series 64ch recording headstage XeSR16: e-series 16ch switchable stimulation + recording headstage XeSR32: e-series 32ch ...

    • My electrode uses a different kind of connector than what is on the X-Headstage. Can I still use the X-Headstage?

      Yes. If you use connectors commonly used in neuroscience, chances are we already have adaptors made. The X-Headstage is designed for minimal size and thus has carefully chosen these small industrial connectors. The adaptor-based approach offers the ...

    • Handling the X-Headstage

      Properly handling the X-Headstage will prolong its lifetime and reliability. To plugin connect the EIB/Probe/Adapter, align the two units directly on top of each other and exert equal force along the entire area. If the connectors are plugged in ...

    • Is armor necessary for the X-Headstage?

      It is possible to use the X-Headstage without the armor, but having an additional layer will offer additional mechanical protection and will likely prolong its lifetime.

    • Notes on X-Headstage IP68 rating

      The X-Headstage has been tested for IP68 rating by a third party (test report here). The rating is achieved with the following: An IP armor is configured with the headstage The optional moisture resistance coating must be specified at the time of the ...