Is a cable longer than the standard 80cm design available?

Is a cable longer than the standard 80cm design available?

KONTEX now offers a custom 3M HDMI cable and a 80cm standard HDMI cable.


We recommend keeping the cable short to maintain optimal signal quality. If the 80cm HDMI cable is sufficient for the behavior experiment, installing the XDAQ with a computer close to the animal, and running Remote Desktop into the control computer could decrease the cable needs. 


    • Related Articles

    • How do I use my old Intan headstages with XDAQ?

      Recording-only headstages (RHD series): Use XDAQ to Intan RHD Headstage Adapter (SKU: SAdpt-XDAQ-OM12). This lets an XDAQ HDMI port drive a standard RHD headstage over the Intan SPI cable. ...

    • Optimizing Digital noise issue with XDAQ with X6R128 or Intan RHD2164

      Issue Description Some XDAQ users have reported noise affecting blocks of 32 channels, particularly when using longer cables with KonteX's X6R128 or Intan RHD2164 chip/probes. This issue is likely due to nanosecond-scale timing inconsistencies in ...

    • Reducing Interference/Noise During XDAQ Recordings

      In electrophysiological experiments, even very small changes in voltage or current—occurring on millisecond or microsecond timescales—can reveal critical neuronal signaling mechanisms. Capturing these subtle electrical events requires highly ...

    • Adapters for the X-Headstage

      The X-Headstages utilize ultra small connectors that are designed with minimal footprint as the primary objective. Thus they may not directly interface with the electrodes (check out KONTEX's EIB or NeuroNexus X-Series probe package) but KONTEX ...

    • What is the purpose of the ground ports in the back of the XDAQ ONE?

      These ports are designed to help troubleshoot and establish an optimal grounding scheme for the XDAQ acquisition hardware and thus minimize noises in the neural recordings. Most instrumentation ties all grounds - digital or analog - together, which ...